Pentax DS Operation Manual - Page 158
Wireless Flash Control P-TTL Flash Mode, Using in Wireless Mode
UPC - 027075110618
View all Pentax DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
156 Using in Wireless Mode 1 Place the AF360FGZ at the desired location. 2 Set the AF360FGZ power switch to [WIRELESS]. 3 Set the AF360FGZ wireless mode to S (Slave). 4 Turn the camera mode dial and set the exposure mode to e, b, c or a mode. 5 Set the AF360FGZ power switch on the camera to [WIRELESS]. 6 Set the AF360FGZ wireless mode on the camera to a (Master) or A (Control). • Wireless mode is not available for the built-in flash. • Set the AF360FGZ wireless slave mode to SLAVE1. Wireless Flash Control (P-TTL Flash Mode) 5 The following information is exchanged between the two AF360FGZ flash units before the flash is discharged when the AF360FGZ is used for wireless flash. Press the shutter release button fully. 1 The camera's flash discharges a pre-flash. (The camera's flash mode is transmitted.) 2 The external flash unit discharges a pre-flash. (The subject's lighting condition is checked.) 3 The camera's flash unit discharges a pre-flash. (The required flash output is transmitted to the external flash.) * The camera's flash will discharge another pre-flash to transmit the flash duration in HSb (High-speed sync). 4 The external flash discharges the main flash. Set the AF360FGZ wireless slave mode to SLAVE1. Function Reference