Pentax DS Operation Manual - Page 146
Press the, button twice., Press the shutter release button halfway.
UPC - 027075110618
View all Pentax DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
144 4 Press the 4 button twice. Shooting is ready and ] is displayed on the LCD panel. Function Reference 5 Press the shutter release button halfway. Focus indicator ] appears in the viewfinder when focused. 6 5 Press the shutter release button fully. Three continuous pictures will be taken, the first with no compensation, the second with negative compensation, and the third with positive compensation. • When the focus mode lever is set to =, the focus is locked in the first frame position and used for subsequent continuous frames. • The auto bracketing exposure setting will remain effective for twice as much time as the metering timer (default setting is 20 seconds) (p.131) when you release your finger from the shutter release button during auto bracketing, and you can take the next picture at the next compensation value. In this case, auto focusing works for each frame. After about twice as much time as the metering timer (default setting is 20 seconds), the camera returns to settings for taking the first picture. • You can combine Auto Bracket with the built-in flash or external flash (TTL and P-TTL auto only) to change only the flash output continuously. However, when using an external flash, holding the shutter release button down to take three continuous frames may cause the second and third frame to be taken before the flash is fully recharged. Always take one frame at a time after confirming that charging is complete. • Auto Bracket is not available when the exposure mode is set to p (Bulb) mode.