Pentax IQZoom 115G IQZoom 115G Manual - Page 44
fine-tuning
View all Pentax IQZoom 115G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Correcting the date Switch the power on. 1. Pressing the DATE button 0 for 3 seconds, the " Year " digits and ( v.7.1r4 ) will blink. 2. Each time the DATE button 0 is depressed, the blinking digits change in the following manner : Year - Month - Day - Hours - Minutes Stop depressing the button when desired digits appear. 3. Move the Zoom lever 0 to the right or left, when you wish to change the blinking digits. The digits increase by one each time the lever moves to the right and the digits decrease by one each time the lever moves to the left. Holding the zoom lever for about one second will change the digits continuously. 4. After the data has been adjusted, depress the DATE button 0 each time until blinking stops. • The blinking "minutes" allows precise fine-tuning of the internal clock to the beginning of a specified minute. To do so, depress the DATE button • each time until the Minutes digits starts blinking, and then depress the DATE button in sync with a time signal. • If you release the shutter while the blinking data is being corrected, the data can- not be imprinted. 42