Pentax PZ-20 PZ-20 Manual - Page 19
Loading
View all Pentax PZ-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
(6) LOADING FILM SNOLLVEIVd3kld 1 Film cartridge 4 loo Film speed (ISO rating) co 10 000000000 0000 'U- 24 00 D DX -mark • We suggest that you first operate the camera with no film loaded to become familiar with its operations. 1. When DX-coded film with ISO ratings from 25 to 5000 is loaded, the film speed is automatically set for the camera. CAUTIONS • THE SHUTTER CURTAINS ARE FINE-PRECISION MATERIAL. DO NOT TOUCH THEM WITH YOUR FINGERS OR ANYTHING WHILE LOADING FILM. • Always load or unload film in the shade or by using your body to shade the camera. • When using non-DX-coded film, set the film speed manually. (See page 80.) 2 O O 0 2. To open the back cover, slide the back-coverrelease lever in the direction of the arrow. 3. Place the film cartridge in the film chamber by fitting its flat side on top of the rewind shaft first and then slide the top end into the camera. • Before loading film for the first time after purchase, open the back cover and remove the protective card as shown in the photo. MAKE SURE NOT TO TOUCH THE SHUTTER CURTAINS. OOOOOOOOOOO 000000 11 0001101.10