Pentax ZX-L ZX-L Manual - Page 106
Using, Multiple, External, Flash, Units, built-in, flash
View all Pentax ZX-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
• Between the built-in flash and external flash, the flash ratio will be 1:2 respectively (summed up when the external flashes are more than one). • When the contrast-control-sync flash mode is used, the maximum flash sync speed will be 1/60 sec. ♦ Using Multiple External Flash Units (with no built-in flash) 1 Setting the flash units Tset up the external flash units apart from the camera. Ili= If a hot shoe grip is used, would cause the TTL metering to function improperly. For instructions for connection, see Lp.102 Set the required flash units' sync mode to Contrast-Control-Sync Flash mode. Output ratio of the flash is 2 for contrast-control-sync mode to 1 for the other flash mode. For instructions on how to set the contrast-control-sync mode, refer to the flash unit's operating manual. 2 Taking a picture Check that all of flash units are ready. Focus the subject and take the picture. liklEr External multiple sync flashes Note the following when you use two or more flashes in sync. • Use the flashes in the following combinations referring to the "Flash functions" ( tg- p.95). • Combine the same type (Type B to F) of flashes. • If you use different type combination of flashes, combine Type C and Type D or Type E and Type F. • Any type of combinations of the built-in flashes can be used.