Pfaff GrandQuilter 18.8 Owner's Manual - Page 4

Light Fixture To add your light fixture to your machine, Step 1. Loosen the nuts so that you can slide the lamp fixture into the space provided on the machine in the lamp support bracket. Step 2. Tighten the nuts on the base of the lamp to secure the lamp to the lamp support bracket on the side of your machine. Step 3. Measure the cord so that you have enough to reach the outlet on top of the power box on your machine. Step 4. Trim the cord flush. You don't need to strip the ends with the plug we provide. Step 5. Find the plug which is shipped with your accessories. Step 6. Open your plug by pulling on the silver tab and open the plug. Trim the wires flush with enough to reach the outlet on the top of the power box. Lay the wires in the space provided in the plug and close the plug. Caution before you close, make sure that you do not have any wires crossed as this will create a short. With the cord in place, plug in your lamp. 4