Pfaff creative 4.5 Manual - Page 114
When mirroring B, the stitch will be mirrored
View all Pfaff creative 4.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
(PEURLGHU\VWLWFKHGLWRU Sequences and stitches can be adjusted in Embroidery stitch editor. You can also adjust your own created sequence or stitch, loaded to Embroidery edit (see chapter 5 and 6). Note: When a stitch or a sequence is loaded into Embroidery edit, tie-offs are automatically inserted at the beginning and at the end. The tie-offs are only visible when you open the stitch or sequence in sequencing. A 26 B C D E $GMXVWVWLWFKHV Open Embroidery stitch editor to adjust the stitches. The adjustments will affect the stitch just like they do in sewing mode. If more than one sequence is inserted, you can toggle between them using the arrows (A). Use the + and - icons to increase or decrease the stitch width (C) and stitch length (D). Density (E) can be changed if satin stitches are inserted. When mirroring (B), the stitch will be mirrored within its own area. It will not affect the position of the stitch like when mirroring is used in Embroidery edit. You can also use the touch functions to make adjustments. The selected stitch will be affected as if it was a design. Note: If you make adjustments to a sequence or stitch in Embroidery stitch editor, you can still use sequencing or Stitch Creator™ feature to modify it. When returning to Embroidery edit, the sequence or stitch will be replaced by the adjusted one. Decrease width of the selected stitch Decrease length of the selected stitch Mirroring the selected stitch side to side Mirroring the selected stitch end to end 8:18 Embroidery mode - edit