Pfaff creative 4.5 Manual - Page 33
Changing the needle, USB ports
View all Pfaff creative 4.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Changing the needle 1. Use the hole in the multi-purpose tool to hold the needle. 2. Loosen the needle screw. 3. Remove the needle. 4. Insert the new needle, using the multi-purpose WRRO3XVKWKHQHZQHHGOHXSZDUGVZLWKWKHÁDW side away from you until it will go no further. 5. Tighten the needle screw as tight as it will go. USB ports Your machine has two USB ports - one to connect the sewing machine to your computer, and one to connect either your USB embroidery stick, optional USB hub or optional mouse. Note: Make sure that the USB stick you use has the format FAT32. USB embroidery stick Delivered with your machine is a USB embroidery VWLFN8VHWKHVWLFNWRVWRUHGHVLJQVDQGRWKHUÀOHV RUWRPRYHÀOHVEHWZHHQWKHFRPSXWHUDQGVHZLQJ machine. Connect to and remove from USB port Insert the USB embroidery stick or other devices in the upper port. The USB plugs can only be inserted one way - do not force them into the ports! The USB PC cable packed with your machine (P/N:412 62 59-04) plugs in to the lower port. No other cable should be used in this port. Connect the other end of the cable to your PC. Note: Install the complimentary software before connecting the machine to your PC (see next page). To remove, carefully pull the USB embroidery stick or the plug of the USB cable out straight. Using the USB embroidery stick When loading from or saving to the USB embroidery stick an hourglass appears on the screen. Note: Do not remove the USB embroidery stick when the hourglass is shown on the screen or while Files & Folders is open. Removing the stick at that time can damage the ÀOHVRQ\RXU86%HPEURLGHU\VWLFN Note: The USB embroidery stick provided with the machine can be left in the machine when putting on the hard cover. Make sure that the cover of the USB stick is turned downwards. 2:11 Preparations