Pfaff creative 4.5 Manual - Page 132
Cut thread end, Machine needs to rest
View all Pfaff creative 4.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
&KDQJHWKUHDGFRORU When it is time to change the needle thread, the machine stops and the upper thread is cut. Change the spool and re-thread the machine. The next recommended color is shown in the pop-up. Cut thread end If Cut jump stitches is not activated in Machine settings in the Settings menu, the machine will stop after stitching a few stitches. Cut the thread and press start/ stop to continue embroidering. (PEURLGHU\LVÀQLVKHG :KHQWKHHPEURLGHU\LVÀQLVKHGDSRSXSZLOODSSHDU on the screen. Touch OK to keep the design(s) loaded and stay in Embroidery stitch-out. &KDQJHWR&XWZRUN1HHGOHRSWLRQDODFFHVVRU\ Some cutwork designs can be stitched out using the optional accessory PFAFF® Embroidery Cutwork Needle Kit, (P/N 820 945-096). These designs are marked with a cutwork needle symbol in the creative™ 4.5 Embroidery Collection. When the machine stops and this pop-up message is shown, insert the corresponding cutwork needle. Touch OK and press the Start/Stop button to resume. Note: These cutwork designs can also be stitched out without the cutwork needles, but will then have to be cut manually. Machine needs to rest If the machine stops and this pop-up appears on the screen, the machine needs to rest. When the OK icon is enabled you can resume embroidery. The embroidery results will not be affected. 9:12 Embroidery mode - stitch-out