Pfaff creative 4.5 Manual - Page 78
step through the sequence.
View all Pfaff creative 4.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
=RRPWRDOO If the stitch or sequence is wider than what can be shown on the screen, you may use the zoom to all icon to see the whole width of the sequence. Note: Zoom to all is only visible if the stitch or sequence LVZLGHUWKDQWKHVWLWFKÀHOG 20 16 /RDGLQJDQGVHZLQJDVHTXHQFH To sew the sequence touch OK (20) in the top right corner of the screen. The sequence will be loaded to the mode that was active before entering sequencing; sewing mode or Embroidery edit. 6HZLQJPRGH In sewing mode it is possible to start sewing anywhere in the sequence. Use the arrows (A) to step through the sequence. If selecting another stitch in sewing mode and then re-opening sequencing, your sequence will remain unchanged. Every time sequencing is closed, the sequence will be loaded to sewing mode. Note: If you have used directional stitches to create your sequence and the total width of the sequence is more than 9mm, the maxi-stitch foot 8 for side motion stitches must be used even if the machine recommends another foot. A 5:6 Sequencing