Pfaff creative 4.5 Manual - Page 92
the foot and through the needle plate.
View all Pfaff creative 4.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
5HPRYHWKHHPEURLGHU\XQLW 1. To store the embroidery unit in the embroidery case, move the embroidery arm to park position by selecting park position on the screen in either Embroidery edit or Embroidery stitch-out. 2. Press the button at the left, underneath the embroidery unit (A) and slide the unit to the left to remove it. 3. The cover of the socket closes automatically. 4. Store the embroidery unit in the original A packing material, place in the soft carrying bag. $WWDFKLQJWKH'\QDPLFVSULQJIRRW' 1. Disengage the IDT™ system (A). Remove the 1 standard presser foot (B). Carefully loosen the C screw (C) until the cross-hole (D) is accessible. A 2. Hold the foot in front of the needle. Turn the hand wheel to lower the needle into the hole of 2 the foot and through the needle plate. D B 3. Turn the foot behind the needle screw (E) and squeeze the foot to insert the pin of the foot into the cross-hole (D) of the presser foot holder. 4. Push the foot into the hole as far as it will go 4 while tightening the screw (C). C To remove the embroidery foot loosen the screw (C), squeeze the embroidery foot together and pull it out to the right. Tighten the screw. 3 E Embroidery mode - preparations 7:4