Pfaff creative 4.5 Manual - Page 60
Note: Not all programs can be used at the same time. You, can sew without closing this pop-up.
View all Pfaff creative 4.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Sewing mode 6HZLQJSURJUDPV 6HZLQJSURJUDPVRYHUYLHZ A Tapering program B Single stitch program C Patchwork program B ' 3UHYLHZÀHOG E Set number of stitch repetitions in single stitch C program Note: Not all programs can be used at the same time. You can sew without closing this pop-up. 7DSHULQJSURJUDP$ Tapering increases or decreases the width of the stitch during sewing to create symmetrical or asymmetrical tapers. Activate tapering by selecting either of the tapering icons (A). The default angle is 45 degrees. Long touch a tapering icon (A) to view the angle choices for that taper. Select one angle for the beginning taper and the same angle or a different one for the end taper. If tapering is deactivated and then activated again, the angle will be set to the previously selected angle. When tapering is activated at both the beginning and at the end and you start to sew, the stitch width will start at 0mm. It becomes wider until the selected stitch width is reached. Sew your desired length and press the reverse button. The width is reduced until the width is 0mm and the action indicator on the machine will be lit until the taper is ÀQLVKHG 6LQJOHVWLWFKSURJUDP% Activate the single stitch program by touching the icon (B). The single stitch program lets you decide how many repetitions of the stitch you want to sew. Set the number of repetitions using the icons on the B right (E). The number of repetitions chosen is shown between the + and - icons. The estimated length of WKHUHSHWLWLRQVLVVKRZQLQWKHSUHYLHZÀHOG' The machine will stop automatically when the repetitions are sewn. 4:12 A D E 21 A A A D E