Philips HTS3450 User manual - Page 36

English DVD Setup Menu Options (continued) Audio Setup Page (underlined options are the factory default settings) Speakers Volume Speakers Delay Night Mode Access the speaker's level setup menu. Use W X keys to adjust the volume level for each connected speaker between -6dB to +6dB. Access the speaker's distance setup menu. Use W X keys to set the delay times for the center and rear speakers based on the listening position and distance. Note: 1 ms increase/decrease of delay time is equivalent to one (1) foot change in distance. Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers. This mode optimizes playback of sound at low volume. High volume outputs will be softened and low volume outputs will be enhanced to an audible level. This feature is only applicable for DVD video discs with Dolby Digital mode. { On } - Turns on night mode. { Off } - Turns off night mode feature. Selects this to enjoy the surround sound with its full dynamic range. CD Upsampling Lip Sync This feature enables you to convert your music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality. If you have activated the CD upsampling feature, the system will automatically switch to stereo mode. { Off } - Turns off CD-upsampling. { 88.2 kHz (X2) } - Select this to convert the sampling rate of the CDs twice as high as the original rate. Note: If you press the SURR button on the remote control to select multi-channel mode, it will turn off the CD upsampling feature. This feature is not applicable for this model. 36