Philips HTS5506 User manual - Page 34

• [AUDIO] may not work on some discs with multiple audio streams or channels (e.g. DVDs that allow changing audio setting on the disc menu). • If the disc has no audio language, "Not Available" will be displayed on the TV screen. • For DTS-CD (5.1 music disc), selecting audio streams or channels is not available. • You can also change the audio setting from the play menu. Play menu can be called up by pressing [OPTION]. D Note • The setting will remain the same even if the unit is switched to standby mode. • "Black Level" is not effective under the following conditions. - When the picture is output from HDMI OUT jack. 8.15. Noise Reduction 8.13. Switching Camera Angles Some BD-videos and DVD-videos contain scenes which have been shot simultaneously from various angles. You can change the camera angle when appears on the TV screen. 1. During playback, press [ANGLE]. • The selected angle will be displayed on the display bar at the top of the TV screen. 2. Use [ ] to select your desired angle. 3. Press [BACK ] to exit. D Note • If "Angle Icon" setting is set to "Off", will not appear on the TV screen. (refer to page 39) • You can also change the angle setting from the play menu. Play menu can be called up by pressing [OPTION]. 8.14. Black Level You can adjust the black level setting to make the black parts of the pictures as bright as you prefer. You can select "On" or "Off". 1. During playback, press [OPTION] to display the play menu. 2. Use [ ] to select "Black Level", then press [OK]. 3. Use [ ] to select your desired setting. e.g.) Blu-ray Disc™ Black Level On "On" : Makes the dark parts blacker with additional contrast and brightness. "Off" : Shows the original picture as recorded. 4. Press [BACK ] to exit. Reduces the noise of the playback picture. 1. During playback, press [OPTION] to display the play menu. 2. Use [ [OK]. ] to select "Noise Reduction", then press 3. Use [ ] to select your desired setting. e.g.) Blu-ray Disc™ Noise Reduction Off "On" : Activates noise reduction. "Off" : Deactivates noise reduction. 4. Press [BACK ] to exit. D Note • The setting will remain the same even if the unit is switched to standby mode. 8.16. Philips Wireless MediaConnect With this feature, you can enjoy your TV as a PC monitor wirelessly using your home network. Make sure you download the Philips Wireless MediaConnect software and install it on your PC before you perform the steps below. „ Install Philips Wireless MediaConnect 1. Press [ (home)] on the Blu-ray Disc™ Home Theater System remote. 2. Use [ [OK]. ] to select "Setup", then press 3. Use [ [OK]. ] to select "Network Setup", then press 4. Use [ [OK]. ] to select "MediaConnect", then press • Write down the 12-digit code displayed on the screen. You will need this to download MediaConnect software. 5. Start your Internet browser on your PC and open the Philips Wireless MediaConnect download page at www.wifimediaconnect.philips.com On the website, you can check the necessary PC system requirements. 6. Enter the 12-digit code you wrote at step 4 and download the MediaConnect software. EN - 34