Philips HTS5506 User manual - Page 46
EasyLink Setup, 12.5. Audio Input Mapping, Get & Set Menu Language
UPC - 609585210561
View all Philips HTS5506 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
12.4. EasyLink Setup (home) A "Setup" A "EasyLink Setup" This unit supports Philips EasyLink, which enables your TV (limited to Philips brand EasyLink TV) to act in conjunction with this unit, or vice versa. Compliant TV must be connected to the HDMI OUT jack. When "EasyLink" setting is set to "On", functions listed below will be available. One Touch Play When the operations with following buttons of the remote control of this unit are performed, the TV will automatically be turned on and switched to the appropriate input channel. ("One Touch Play" can be turned off by setting it to "Off".) Buttons for one touch play: - [ (play)], [ (previous)], [ (next)], [the Number buttons], [ (home)], [Net-TV], or [SOURCE] - [TOP MENU], or [DISC MENU / POP-UP MENU] (when a disc is inserted in the unit) One Touch Standby When you press and hold [ (standby/on)] for 2 seconds, it turns off the power of the TV first and then turns off the power on this unit. When the connected EasyLink compatible display device is turned off first, it then turn off the power on this unit. ("One Touch Standby" can be turned off by setting it to "Off".) System Information Get & Set Menu Language The unit recognizes the OSD language set of the TV and automatically sets the same language as the player menu language (OSD menu language) for this unit. Refer to "Menu Language" on page 39 for available languages. • This feature is available only when "Auto (XXXX)" is selected in the "Menu Language" in the setup menu. System Audio Control When you set your TV to output the audio from the 5.1ch speakers through this unit, you can control the volume level or mute the audio using TV's remote control. (For more details, refer to the owner's manual of your TV.) D Note • For external input mode, "One Touch Play" is not available. • Volume level will be displayed on the display panel. • If you change the speaker setting of your TV to output the audio from TV's speaker, 5.1ch speakers will be muted. (To restore the volume, use the remote control of this unit.) • When you switch this unit into standby mode, TV's speaker will be activated automatically. • Depending on the connected TV, two device names ("PHILIPS BD-HTS" and "Audio System") may be displayed in the device list of TV's menu screen. To select this unit, please select "PHILIPS BD-HTS". 12.5. Audio Input Mapping Use to map a connected HDMI device to the correct audio input for automatic audio source switching. This unit is compatible with HDMI-ARC devices. Audio Input Mapping is available only when "System Audio Control" is set to "On". 1. Use [ ] to select "Setup" in the home menu, then press [OK]. 2. Use [ [OK]. ] to select "EasyLink Setup", then press 3. Use [ ] to select "Audio Input Mapping ", then press [OK]. 4. Read the information on the TV screen and make sure that all devices are connected properly. Use [ ] to select "Continue", then press [OK]. • Unit starts scanning for compatible devices connected to its HDMI ports. • Compatible devices found will be listed on the TV screen. 5. Use [ ] to select "Continue", then press [OK]. To connect your Home Theater System, select the audio input connector in the second column that connects to the device in the first column. The following HDMI devices were found. PHILIPS TV 6. Use [ [OK]. Rescan Continue ] to select a desired device, then press EN - 46