Philips LC3631 User Manual - Page 10

XP LC6281/6285 EVA English 01-08-2003 17:51 Pagina 10 2. Functional overview 789 MENU OK VOLUME + PICTURE SIZE - PICTURE SIZE + VOLUME - SOURCE 0 !@ STANDBY/ON OK PICTURE SIZE + VOLUME + MENU VOLUME - PICTURE SIZE - SOURCE Controls > 1 234 65 y On / Standby 1 Standby/Remote control indicator To switch the projector in or out of the Power/Standby mode. The indicator on the button: - lights red when the projector is in Power/Standby mode; - lights green when the projector is in operation mode; - slowly blinks green when the projector is warming up; - slowly blinks red when the projector is cooling down; - fast blinks red/yellow for 1 second when the projector receives a signal from the remote control in Power/Standby mode; - fast blinks green/yellow for 1 second when the projector receives a signal from the remote control in operation mode. Error indicator 2 - Lights up red in case of lamp error - Fast blinks red in case of temperature error IR sensor 3 To receive the signals from the remote control. Height/Level adjuster 4 To adjust the vertical angle of the projector. Focus ring 5 To adjust the focus of the projected image. On LC6285 only Zoomring 6 Adjust the size of the projected image. Menu 7 To activate and deactivate the menu. Volume -/+ 8 To adjust the volume. OK 9 To confirm actions in the menu when the menu is on screen. Picture size -/+ 0 To reduce/enlarge the size of the projected picture. Source ! To select the current projection source (Auto, Multimedia,YPbPr, RGBsync, RGsogB, S-Video, Video).The button toggles between the seven signals. When 'Auto' is selected the source with the highest priority will automatically be selected (Multimedia,YPbPr or RGsogB, RGBsync, S-Video,Video). When only one input source is connected, this will automatically be selected. Philips Home Cinema Projector 10 English User guide LC 6281 / LC 6285