Philips LC3631 User Manual - Page 40
In case of RGsogB Scart connection, In case of YPbPr or RGsogB Scart connection, LC 6281 / LC 6285 - troubleshooting
View all Philips LC3631 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
XP LC6281/6285 EVA English 01-08-2003 17:52 Pagina 40 7.Troubleshooting > In case of RGsogB (Scart) connection - 'RGsogB' is not selected in the menu and 'Auto Source' is activated. In this case 'Auto Source' will not recognize 'RGsogB'. • Select 'RGsogB' as projection source in the 'Set up' menu ('Auto Component Selection' sub menu). Poor colour Note • Adjust 'Brightness', 'Contrast', 'Tint' or 'Hue' (see 'Picture adjustment' under 'Operation' - 'On Screen Display Menu'). • Reset all projector settings in the 'Set up' menu ('Factory reset'). Please note that all other projector settings will be reset as well. In case of YPbPr or RGsogB (Scart) connection - Wrong component source selected in the menu:YPbPr i.s.o. RGsogB or vice versa. • Check what source has been connected ('YPbPr' or 'RGsogB') and select this source the 'Set up' menu ('Auto Component Selection' sub menu). Image is blurred - Image is not focused. • Adjust focus ring. - Distance between projector and screen is not correct. • Adjust the distance between the projector and the screen. See table on page 10. - Signal cable is not correctly connected. • Connect signal cable correctly. Picture rolls - Signal cable is not correctly connected. • Connect signal cable correctly. No sound - Audio cable is not correctly connected. • Connect audio cable correctly. - Volume is not adjusted properly. • Adjust volume. - (A/V-)Mute active. • Cancel (A/V-)Mute. The projector does not react to commands from the remote control - Distance is too great. • Reduce distance. - Batteries are exhausted. • Replace batteries (see 'Inserting the batteries in the remote control'). - IR sensor is obstructed. • Remove obstacle. Philips Home Cinema Projector 40 English User guide LC 6281 / LC 6285