Philips MCM530 User manual - Page 17

English Basic Operations Switching on /off Switching to active mode ● Press CD, TUNER, AUX or USB PC LINK. Switching to Eco Power standby mode ● Press B. ➜ ECO POWER button lights up. ➜ The display screen will go blank. Setting the clock The clock can be set in either 12-hour or 24-hour mode ("11:59 PM" or "23:59" for example). 4 (00:00 / 12:00AM) 1 3 (00:00 / 12:00AM) 2 (00:00 î 12:00AM) Switching to standby mode (view clock) ● Press and hold B. ➜ The clock is displayed. ➜ While in the standby mode, pressing CLOCK•TIMER will switch the system to the Eco Power standby mode. Note: - Before switching the system to the Eco Power standby or standby mode, make sure the demonstration mode has been deactivated. Demonstration mode If the demonstration mode is active, whenever you switch the system to the Eco Power standby or standby mode, it will begin showing the various features offered by the system. To activate the demonstration ● In Eco Power standby/standby mode, press and hold Ç on the main unit for 5 seconds until "DEMO ON" is displayed. To deactivate the demonstration ● Press and hold Ç on the main unit for 5 seconds until "DEMO OFF" is displayed. 1, 5 1 Press and hold CLOCK on the remote until the time flashing on the display. OR Press and hold CLOCK•TIMER on the main unit until "SELECT CLOCK OR TIMER" is displayed. Then press ë to change the display to "CLOCK" and press CLOCK•TIMER again to confirm. 2 Press PROGRAM (PROG) repeatedly to change between 12-hour and 24-hour clock mode. 3 Press à or á repeatedly to set the hour. 4 Press í or ë repeatedly to set the minute. 5 Press CLOCK (or CLOCK•TIMER) to store the setting. ➜ The clock will start working. Notes: - The clock setting will be erased when the system is disconnected from the power supply. - The system will exit clock setting mode if no button is pressed within 90 seconds. 17