Philips MCM530 User manual - Page 24

English Timer Operations Temporarily deactivating the wake up timer You are only able to activate the Snooze function within 30 minutes after the timer wakes up from standby mode. 1 After timer wake up, press SNOOZE on the remote. ➜ The system will switch to standby mode for five minutes. After that, it resumes the last selected source again. 2 To cancel the snooze function, press SNOOZE again. Other Connection Listening to an external source You can listen to the sound of the connected external device through your system's speakers. Sleep timer setting The sleep timer turns the system to Eco Power standby mode at a preselected time. 1 Press SLEEP repeatedly until it reaches the desired preset turn-off time. ➜ The selections are as follows (time in minutes): 15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120 ™ OFF ™ 15 ... ➜ SLEEP is shown, except for "OFF" mode. ➜ To view or change the setting, repeat the above. 2 Before the system switches to Eco Power standby mode, a countdown of 10 seconds is displayed. "SLEEP 10" ™ "SLEEP 9".... ™ "SLEEP 1" ™ "SLEEP" To cancel the sleep timer ● Press SLEEP repeatedly until "OFF" is displayed, or press the STANDBY ON B button. 1 Use the red/white audio cables to connect the system's AUX/CDR IN (R/L) terminals to the AUDIO OUT terminals on the other audio / visual device (such as a TV,VCR, Laser Disc player, DVD player or CD recorder) ➜ If the connecting device has only a a single audio out terminal, connect it to the AUX /CDR IN left terminal. Alternatively, you can use a "single to double" cinch cable, but the output sounds still remain mono. 2 Press AUX repeatedly. ➜ Select "AUX" when connecting to a TV, VCR or Laser Disc player. ➜ Select "AUX/CDR" when connecting to a CD recorder or DVD player. 3 Press PLAY on the connected device to start playback. Notes: - All the sound control features (DSC,VEC for example) are available for selection. - Always refer to the owner's manual of the other equipment for complete connection and use details. 24