Philips MX6000I User manual - Page 21

English Internet and PC Link Before connecting 1 If you have a wired or a wireless home network and you have not set it up yet, consult the user´s manual of your (wireless) router on how to set up the network and how to connect to the Internet. 2 Check if the computers in your network connect properly to the Internet and to each other. If you face any problems connecting to the Internet, consult your Internet service provider. 3 Install the Philips Media Manager software on the PCs of your network: Either download the latest version at "My.Philips.com" or install it from the supplied CD-ROM. Please refer to the installation guide of the Media Manager software for installing the software and making media files of your PCs available to the Streamium System. 4 Switch on the TV and set the TV to the correct audio/video channel for the Streamium System. Such channels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1, EXT2 or EXTERNAL IN, etc.These channels are often near channel 00. Note: If you did not connect the Streamium System to a TV, observe the display on the Streamium System. 5 Switch on the Streamium System. 6 Depending on your home network, continue with one of the following 4 sections: - A) Wireless home network with a wireless router, - B) PC with a wireless network card or with a wireless USB adapter, - C) Wired home network with a router, - D) PC only with a network interface (Ethernet) card. Check the illustrations at the beginning of each section to find out which of the 4 cases describes your home network best. A) Wireless home network with wireless router Follow these instructions if you have - a wireless router and - broadband Internet access. broadband internet 1 Press INTERNET on the remote control. ➜ The Streamium System tries to connect automatically to a wireless network. 2 If the Streamium System connects to a wireless network, it will display its network name (SSID) briefly. Please verify that the displayed network name corresponds to the network you want to join. If you want to connect to another network, press SYSTEM MENU and select Network Settings ➜ Network Config. to change the wireless network settings. After connecting to the Internet the Streamium System will ask you to enter your email address. Continue with "Registration." If the Streamium System fails to connect, read the message on the TV screen and continue with one of the following paragraphs. If 'Choose your wireless network' appears Several wireless networks or one encrypted network are available. 1 Press 4 or 3 repeatedly to select the network you want to join. If the desired network does not appear, press the red button (SUBTITLE) on the remote control to select manual and continue with "If 'Enter wireless network name (SSID)' appears." 2 Press the green button (ANGLE) on the remote control to confirm the selected network. 3 If the selected network is WEP encrypted, continue with "If the network is WEP encrypted." If the Streamium System connects to the Internet, continue with "Registration." Please visit http://My.Philips.com 21