Philips NP1100 User manual - Page 23

9 Technical data General AC Power DC Power Dimensions (w x h x d) Weight (net) Voltage information is printed on the back or the underside of the NP1100. 5V / 1A 195 x 104 x 38 mm approx. 0.44kg Power consumption On Standby (active) < 5W < 4W Audio output Line out SPDIF Headphone Signal to noise ratio (line out) Signal to noise ratio (heaphone) Distortion (line out / headphone) 2x Cinch, 500 mV, 20 - 20000 Hz 1x Cinch (Coax), 0.5 V, 75 Ohms 1x 3.5 mm jack, 1 V, 30 - 16000 Hz typ. 85 dBA (IEC) typ. 75 dBA (IEC) < 0.3 % Wireless Wireless 802.11g, backwards compatible to standard 802.11b Wireless WEP (64 or 128 bit), security WPA/WPA2 (8-63 characters) Frequency 2412 - 2462MHz CH1-CH11 (for range /79, /37, /17, /55, /97) 2412 - 2472MHz CH1-CH13 (for /12, /05) Antenna 2x internal, diversity mode enabled Wired (LAN / Ethernet) 24 EN Wired standard Speed Mode Crossover detection (Auto MDIX) 802.3 / 802.3 u 10 / 100 MBit/s half / full duplex Yes Display Resolution Size Dot matrix 128 x 64 dots 4.1 inches Specifications and external appearance are subject to change without notice. Supported audio file formats The NP1100 supports the following audio file formats: • MP3 (8-320kbps and VBR) • WMA (up to 192kbps) • AAC (16-320 kbps and VBR16) Note • The display of the NP1100 supports directories with nesting up to a maximum of 8 levels. Supplied accessories • Remote control • 2 AAA batteries • AC power adapter with cable • RCA cable PC connection requirements The minimum requirements for PC connections are: • Windows 2000 SP4 (or above) / XP SP2 / Vista • Pentium III 500MHz processor or higher • 256MB RAM • CD-ROM drive