Pioneer AVH-501EX Owners Manual - Page 110
Problems with the phone screen, Problems with Application, screen - review
View all Pioneer AVH-501EX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
English The camera input may be loose or not connected. - Check the connection and make sure the male end of the camera is connected to the brown input on the back of the receiver. (Refer to the installation manual.) The reverse lead on the receiver may not be connected to the proper wire at the reverse lamp. - Check the connection and make sure that the violet/white lead of the receiver is connected to the lead whose voltage changes when the shift lever is put in reverese. (Refer to the installation manual.) Black screen displayed when the vehicle is in reverse, with no camera installed. Back camera input is set to On. - Turn the setting to Off in the settings menu. (Refer to the System Settings section of this manual to adjust.) Back image displayed when vehicle is not in reverse. The camera polarity is not set properly in the Camera settings menu. - Review System Settings section of this manual for steps to switch the camera polarity. Park in a safe place, then while keeping your foot firmly on the brake, put the vehicle in reverse, access the System Settings menu, and change the camera polarity setting. Put vehicle back in park. (Refer to the System Settings section of this manual to adjust.) Problems with the phone screen Dialing is impossible because the touch panel keys for dialing are inactive. Your phone is out of range for service. - Retry after re-entering the range for service. The connection between the cellular phone and this product cannot be established. - Perform the connection process. Of the two cellular phones connected to this product at the same time, if the first phone is dialing, ringing or a call is in progress, dialing cannot be performed on the second phone. - When the operation on the first of the two cellular phones is completed, use the switch devices key to switch to the second phone and then dial. Problems with Application screen A black screen is displayed. While operating an application, the application was ended on the smartphone side. - Press to display the top menu screen. The smartphone OS may be awaiting screen operation. - Stop the vehicle in a safe place and check the screen on the smartphone. The screen is displayed, but operation does not work at all. An error has occurred. - Park your vehicle in a safe place, and then turn off the ignition switch (ACC OFF). Subsequently, turn the ignition switch to on (ACC ON) again. - When an Android device is connected, disconnect the Bluetooth connection from this product and then reconnect it. The smartphone was not charged. Charging stopped because the temperature of the smartphone rose due to prolonged use of the smartphone during charging. - 110 -