Pioneer AVH-P4900DVD Owner's Manual - Page 72
Error messages, Understanding auto TA and EQ error messages, Additional Information
UPC - 012562853161
View all Pioneer AVH-P4900DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Appendix Additional Information Error messages When you contact your dealer or your nearest Pioneer Service Center, be sure to record the error message. Message ERROR-02 ERROR-05 DIFFERENT REGION DISC (REGION ERR) NON PLAYABLE DISC (NONPLAY) THERMAL PROTECTION IN MOTION (TEMP) PROTECT TRK SKIPPED Cause Action (See) Dirty disc Clean disc. Scratched disc Replace disc. Electrical or mechanical Press RESET. The disc does not have the same re- Replace the DVD video with one bearing the gion number as this unit correct region number. This type of disc cannot be played Replace the disc with one this unit can play. by this unit The disc is loaded upside down Check that the disc is loaded correctly. The temperature of this unit is out- Wait until the unit's temperature returns to side the normal operating range within normal operating limits. All the files on the inserted disc are Replace disc. secured by digital rights management (DRM) The inserted disc contains WMA files that are protected by digital rights management (DRM) Replace disc. Understanding auto TA and EQ error messages When correct measurement of car interior acoustic characteristics is not possible using the auto TA and EQ, an error message may appear on the display. If an error message appears, refer to the table below to see what the problem is and the suggested method of correcting the problem. After checking, try again. Message Cause Action Error check MIC Microphone is not connected. Plug the supplied microphone securely into the jack. Error check front SP, Error check FL SP, Error check FR SP, Error check center SP, Error check RL SP, Error check RR SP, Error check subwoofer The microphone cannot pick up the measuring tone of a speaker. ! Confirm that the speakers are connected correctly. ! Correct the input level setting of the power amp connected to the speakers. ! Set the microphone correctly. Error check noise The surrounding noise level is too high. ! Stop your car in a place that is as quiet as possible, and switch off the engine, air conditioner or heater. ! Set the microphone correctly. 72 En