Pioneer AVH-P5200BT Installation Manual - Page 4
Connecting the power cord - inputs
UPC - 012562975900
View all Pioneer AVH-P5200BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Connecting the units Connecting the power cord Wired remote input (WIRED REMOTE INPUT) Hard-wired remote control adaptor can be connected (sold separately). Microphone (supplied) (AVH-P5200BT only) 17 cm (6-3/4 in.) 17 cm (6-3/4 in.) RGB input Microphone input Jack (MIC) (AVH-5200BT only) IP-BUS input (Blue) 4 m (13 ft. 1 in.) This product Fuse (10 A) Yellow Connect to the constant 12 V supply terminal. Orange/white Connect to lighting switch terminal. Red Connect to terminal controlled by ignition switch (12 V DC). Fuse resistor Fuse resistor Black (chassis ground) Connect to a clean, paint-free metal location. White Front speaker Left Rear speaker or Subwoofer (4 Ω) White/black Green Green/black Gray Gray/black Violet Violet/black Front speaker Right Rear speaker or Subwoofer (4 Ω) When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit. Do not connect anything to Green and Green/black leads. Green Not used. Green/black Violet Violet/black Subwoofer (4 Ω) × 2 4