Pioneer AVH-P5200BT Installation Manual - Page 5

Connecting the units English 80 cm (2 ft. 7 in.) Tuner box (supplied) IP-BUS cable 26 pin cable (Supplied with Navigation unit) Insert the 26 pin cable in the direction indicated in the figure. Connection method 1. Clamp the lead. Antenna input 80 cm (2 ft. 7 in.) Antenna cable (supplied) Pioneer IP-BUS accessories Navigation unit (AVIC-U220 (sold separately)). Please contact your dealer to inquire about the connectable navigation unit. 2. Clamp firmly with needle-nosed pliers. Note: · The position of the parking brake switch depends on the vehicle model. For details, consult the vehicle Owner's Manual or dealer. Light green Used to detect the ON/OFF status of the parking brake. This lead must be connected to the power supply side of the parking brake switch. Power supply side Ground side Blue/white Connect to system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC). With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers. Note: · Change the initial setting of this unit (refer to the Operation Manual). The subwoofer output of this unit is monaural. Parking brake switch 5