Pioneer AVH-P6600DVD Owner's Manual - Page 72
Introduction of DSP, adjustments, Using the sound field control, Digital Signal Processor
![]() |
UPC - 012562682853
View all Pioneer AVH-P6600DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Section 15 Digital Signal Processor Introduction of DSP adjustments 1 You can use this unit to control multi-channel processor (e.g. DEQ-P8000), which is sold separately. ! Some functions may differ depending on the multi-channel processor connected to this unit. By carrying out the following settings/adjustments in the order shown, you can create a finely-tuned sound field effortlessly. 1 Setting the speaker setting 2 Using the position selector 3 Auto TA and EQ (auto-time alignment and autoequalizing) 4 Adjusting the time alignment 5 Adjusting the speaker output levels using a test tone 6 Selecting a cut-off frequency 7 Adjusting the speaker output levels 8 Adjusting 3-band parametric equalizer 1 DSP display Shows the DSP function names. % Touch A.MENU and then touch DSP to display the DSP function names. The DSP function names are displayed and operable ones are highlighted. # When A.MENU is not displayed, you can display it by touching the screen. # You can also display MENU by clicking the joystick. # To go to the next group of function names, touch NEXT. # To return to the previous group of function names, touch PREV. # When playing discs recorded with more than 96 kHz sampling frequency, you cannot use audio functions. Also, equalizer curve setting, POSITION, AUTO EQ and AUTO TA will be cancelled. # When playing discs recorded with more than 96 kHz sampling frequency, audio is outputted from front speaker only. # When selecting the FM tuner as the source, you cannot switch to SLA. # When playing other than the DVD disc, you cannot switch to D.R.C. # When neither FRONT-L nor FRONT-R is selected in POSITION, you cannot switch to TIME ALIGNMENT. # To return to the previous display, touch BACK. # To return to the display of each source, touch ESC. Note If you do not operate the DSP function within about 30 seconds, the display is automatically returned to the source display. Using the sound field control The SFC function creates the sensation of a live performance. ! The acoustics of different performance en- vironments are not the same and depend on the extent and contour of space through which sound waves move and on how sounds bounce off the stage, walls, floors and ceilings. At a live performance you hear music in three stages: direct sound, early reflections, and late reflections, or reverberations. Those factors are programed 72 En
![](/manual_guide/products/pioneer-avhp6600dvd-owners-manual-7c6cb86/72.png)