Pioneer AVH-P6600DVD Owner's Manual - Page 89
Adjusting initial settings, Switching the warning tone, Switching the auxiliary setting, Setting
![]() |
UPC - 012562682853
View all Pioneer AVH-P6600DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Initial Settings Section 17 Initial Settings Adjusting initial settings 1 Initial settings lets you perform initial setup of different settings for this unit. 1 Function display Shows the function names. 1 Touch the source icon and then touch OFF to turn this unit off. # When the source icon is not displayed, you can display it by touching the screen. 2 Touch A.MENU and then touch INITIAL to display the function names. The function names are displayed and operable ones are highlighted. # When A.MENU is not displayed, you can display it by touching the screen. # You can also display MENU by clicking the joystick. # To go to the next group of function names, touch NEXT. # To return to the previous group of function names, touch PREV. # When the multi-channel processor (e.g., DEQP8000) is connected to this unit, you can operate DIGITAL ATT instead of REAR SPEAKER. # To return to the previous display, touch BACK. # To return to the display of each source, touch ESC. Switching the warning tone If the front panel is not detached from the head unit within five seconds of turning off the ignition, a warning tone will sound. You can turn off the warning tone. 1 Touch A.MENU and INITIAL and then touch DETACH WARNING. 2 Touch a to turn warning tone on. # To turn warning tone off, touch b. Switching the auxiliary setting It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. 1 Touch A.MENU and INITIAL and then touch AUX. 2 Touch a to turn auxiliary setting on. # To turn auxiliary setting off, touch b. Setting the rear output and subwoofer controller This units rear output (rear speaker leads output and RCA rear output) can be used for fullrange speaker (FULL) or subwoofer (SUB. W) connection. If you switch the rear output setting to the SUB. W, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp. En 89
![](/manual_guide/products/pioneer-avhp6600dvd-owners-manual-7c6cb86/89.png)