Pioneer AVH-P6600DVD Owner's Manual - Page 75
Using the direct control, Using the Dolby Pro Logic, Digital Signal Processor
UPC - 012562682853
View all Pioneer AVH-P6600DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Digital Signal Processor Section 15 Digital Signal Processor 2 Touch either of the following touch panel keys to select the desired setting. ! Lt/Rt Down mix so that the surround components can be restored (decoded). ! Lo/Ro Stereo mix the original audio that do not contain channel modes such as surround components. Using the direct control You can override audio settings to check for effectiveness of your audio settings. ! All audio functions are locked out when the direct control is on except VOLUME. 1 Touch A.MENU and DSP and then touch DIGITAL DIRECT. 2 Touch a to turn the direct control on. # To turn direct control off, touch b. Using the Dolby Pro Logic B Only when the multi-channel processor (e.g., DEQ-P8000) is connected to this unit, you can operate this function. Dolby Pro Logic B creates five full-bandwidth output channels from two-channel sources to achieve high-purity matrix surround. ! Dolby Pro Logic B supports up to 48kHz sampling rate stereo source and has no effect on other types of source. 1 Touch A.MENU and DSP and then touch NEXT. 2 Touch DOLBY PRO LOGIC B. 3 Touch any of the following touch panel keys to select the desired mode. ! MOVIE The Movie mode suitable for movie playback ! MUSIC The Music mode suitable for music playback ! MATRIX The Matrix mode for when FM radio reception is weak ! OFF Turn Dolby Pro Logic B off ! MUSIC ADJUST Adjust the Music mode # You can operate MUSIC ADJUST only when MUSIC has been selected. Adjusting the Music mode You can adjust the Music mode with the following three controls. ! Panorama (PANORAMA) extends the front stereo image to include the surround speakers for an exciting wraparound effect. ! Dimension (DIMENSION) allows you to gradually adjust the sound field either towards the front or the rear. ! Center Width (CENTER WIDTH) allows center-channel sounds to be positioned between the center speaker and the left/right speakers. It improves the left-center-right stage presentation for both the driver and the front passenger. 1 Touch A.MENU and DSP and then touch NEXT. 2 Touch DOLBY PRO LOGIC B. 3 Touch MUSIC and then touch MUSIC ADJUST. # You can operate MUSIC ADJUST only when MUSIC has been selected. En 75