Pioneer AVH-P6600DVD Owner's Manual - Page 77
Selecting a cut-off frequency, Adjusting the speaker, output levels, Digital Signal Processor
UPC - 012562682853
View all Pioneer AVH-P6600DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Digital Signal Processor Section 15 Digital Signal Processor 1 Touch A.MENU and DSP and then touch NEXT. 2 Touch SPEAKER SETTING. 3 Touch or to select SUB WOOFER (subwoofer). Each time you touch or selects the speaker in the following order: FRONT (front speakers)CENTER (center speaker)REAR (rear speakers) SUB WOOFER (subwoofer)PHASE (subwoofer setting) 4 Touch to turn subwoofer output on. # To turn subwoofer output off, touch . 5 Touch and then touch or to select the phase of subwoofer output. Touch to select normal phase and NORMAL appears in the display. Touch to select reverse phase and REVERSE appears in the display. Note When playing a 2-channel mono source with Pro Logic turned on, there may be occasions when the following will occur: ! No audio is output if the center speaker set- ting is SMALL or LARGE and no center speaker is installed. ! Audio is heard only over the center speaker if installed and the center speaker setting is SMALL or LARGE. Selecting a cut-off frequency You can select a frequency, under which sounds are reproduced through the subwoofer. If the installed speakers include one whose size has been set to SMALL, you can select a frequency, under which sounds are repro- duced through a LARGE speaker or subwoofer. 1 Touch A.MENU and DSP and then touch NEXT. 2 Touch CROSS OVER. 3 Touch or to select the speaker to be adjusted. Each time you touch or selects the speaker in the following order: FRONT (front speakers)CENTER (center speaker)REAR (rear speakers) SUB WOOFER (subwoofer) 4 Touch or to select cut-off frequency. Each time you touch or selects cut-off frequencies in the following order: 6380100125160200 (Hz) Note Selecting a cut-off frequency is to set a cut-off frequency of the subwoofers L.P.F. (low-pass filter) and that of the SMALL speaker H.P.F. (high-pass filter). The cut-off frequency setting has no effect if the subwoofer is set to OFF and other speakers are set to LARGE or OFF. Adjusting the speaker output levels You can readjust the speaker output levels using a test tone while listening to music. 1 Touch A.MENU and DSP and then touch NEXT. 2 Touch SPEAKER LEVEL. En 77