Pioneer AVIC-5200NEX Owner s Manual - Page 65

System settings 2 Using packing tape or similar, place markings as follows. 2 m (6 ft. 7 in.) Markings 50 cm (1 ft. 8 in.) 25 cm (9-7/8 in.) Markings 25 cm (9-7/8 in.) Rear bumper 3 Display the "System" setting screen.  Refer to Displaying the "System" setting screen on page 63 4 Touch [Camera settings]. 5 Touch [Parking Assist Guide Adjust]. 6 Set the guidelines by dragging the four points. Adjust the guidelines so that the guidelines can be overlaid to the markings p Touch / / / / / to adjust the guidelines if necessary. Touch [Default] to reset the settings. Setting the second camera You can view images of the second camera (a front camera etc.) on the screen of this product. Setting the second camera activation The default setting is "Off". p This function is synchronized with "AV Input" setting. 1 Display the "System" setting screen.  Refer to Displaying the "System" setting screen on page 63 2 Touch [Camera settings]. 3 Touch [2nd Camera Input] to switch "On" or "Off". Setting the reversed image The default setting is "Off". p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. p This function is available when "AV Input" is set to "Camera" or "2nd Camera Input" is set to "On". 1 Display the "System" setting screen.  Refer to Displaying the "System" setting screen on page 63 2 Touch [Camera settings]. 3 Touch [2nd Camera: Reverse video] to switch "On" or "Off". Setting the camera for Camera View mode To display Camera View at all times, "Camera View" needs to be set to "On". (The same mode is turned on when is touched on the camera view screen. The setting value is synchronized.) The default setting is "Off". p To set the rear view camera as the camera for Camera View mode, set "Back Camera Input" to "On".  Refer to Setting rear view camera activation on page 64 p When using the second camera, set "AV Input" to "Camera" or "2nd Camera Input" to "On" (both settings are synchronized).  Refer to Setting the second camera on page 65 1 Display the "System" setting screen.  Refer to Displaying the "System" setting screen on page 63 2 Touch [Camera settings]. 3 Touch [Camera View] to switch "On" or "Off". p You can also turn this function on by touching [Camera View] on the AV source selection screen or in the source list. Setting the demo mode The default setting is "On". 1 Display the "System" setting screen.  Refer to Displaying the "System" setting screen on page 63 2 Touch [Demo Mode] to switch "On" or "Off". Selecting the system language p If the embedded language and the selected language setting are not the same, text information may not display properly. p Some characters may not be displayed properly. 1 Display the "System" setting screen.  Refer to Displaying the "System" setting screen on page 63 2 Touch [System Language]. 3 Touch the language. Setting the keyboard language with the application for iPhone You can use the keyboard in AppRadio Mode by setting the language of the keyboard for iPhone. p This function is only available in AppRadio Mode on the iPhone. 1 Display the "System" setting screen.  Refer to Displaying the "System" setting screen on page 63 2 Touch [Keyboard]. 3 Touch the language. Adjusting the response positions of the touch panel (touch panel calibration) 7200NEX 6200NEX 5200NEX If you feel that the touch panel keys on the screen deviate from the actual positions that respond to your touch, adjust the response positions of the touch panel screen. p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. p Do not use sharp pointed tools such as a ballpoint or mechanical pen, which could damage the screen. p Do not turn off the engine while saving the adjusted position data. 1 Display the "System" setting screen.  Refer to Displaying the "System" setting screen on page 63 2 Touch [Touch Panel Calibration]. 65