Pioneer AVIC-D3 Other Manual - Page 13

English Extension lead (for speed signal) 5 m (16 ft. 5 in.) Note: Cords for this product and those for other products may be different colors even if they have the same function. When connecting this product to another product, refer to the supplied manuals of both products and connect cords that have the same function. The navigation unit 10 Power cord Español Deutsch Français Violet/white (REVERSEGEAR SIGNAL INPUT) This is connected so that the navigation system can detect whether the vehicle is moving forwards or backwards. Connect the violet/white lead to the lead whose voltage changes when the shift lever is put in reverse. Unless connected, the sensor may not detect your vehicle traveling forward/backward properly, and thus the position of your vehicle detected by the sensor may be misaligned from the actual position. Note: When you use the ND-PG1 speed pulse generator (sold separately), please make sure to connect this lead. When you use a rear view camera, please make sure to connect this lead. Otherwise you cannot switch to rear view camera picture. See Page 15. For information on other leads See Page 9. Connection method Clamp the backup light lead. Clamp firmly with needle-nosed pliers. Be sure to use only the supplied extension lead. Use of another lead could cause fire, smoke and/or damage this navigation system. Fuse resistor Extension lead (for reverse signal) 5 m (16 ft. 5 in.) Check the position of your vehicle's backup light (the one that lights up when the shift lever is in reverse [R]) and find the backup light lead in the trunk. Backup light lead 12 Italiano Nederlands