Pioneer AVIC-D3 Other Manual - Page 23
Installation using the screw holes on the side of the navigation unit
UPC - 012562844169
View all Pioneer AVIC-D3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
English Español Installation using the screw holes on the side of the navigation unit 1. Fastening the navigation unit to the factory radio-mounting bracket. Position the navigation unit so that the brackets screw holes and its screw holes are aligned (are fitted), and tighten the screws at 3 or 4 locations on each side. Use either the binding screws (5 × 6 mm) or flush surface screws (5 × 6 mm), depending on the shape of the bracket's screw holes. Factory radio mounting bracket If the pawl gets in the way, bend it down Binding screw or flush surface screw Be sure to use the screws supplied with this navigation system. Dashboard or console Note: In some types of automobiles, discrepancy may occur between the navigation unit and the dashboard. If this happens, use the supplied frame to fill the gap. Deutsch Français Italiano Nederlands 22