Pioneer CDJ 100S Owner's Manual - Page 12
Fader Start Playback, Cueing, Relay Play Using Two Players - mixer
UPC - 012562450261
View all Pioneer CDJ 100S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
ADVANCED OPERATIONS: SPECIAL DISC JOCKEY TECHNIQUES During fader start Cotrol cables Jog dial Cueing 7 Confirm a cue point (cue point sampler) After setting a cue point, press and hold the CUE button. ÷ As long as the CUE button is held depressed, the sound of the track at the cued point can be heard. 7 Return to a cue point (back cue) 1. During playback, press the CUE button. ÷ The player returns to the set cue point and enters standby mode. 2. Press the PLAY/PAUSE button (6 ). ÷ Playback will begin instantly from the cue point. 7 Modify a cue point (cue point adjust) 1. During playback, press the CUE button. ÷ The player returns to the set cue point and enters standby mode. 2. Press the SEARCH buttons (1, ¡ ). ÷ The cue point moves in 1-frame increments (broken sound will be reversed). ÷ The cue point can also be changed by rotating the jog dial after pressing the SEARCH buttons (1, ¡) 3. Press the CUE button. ÷ The new cue point will be set at the point the CUE button is pressed. Fader Start Playback A commercially available mini-plug cord can be used to connect this unit's CONTROL jack to one of the optional DJ mixers DJM-500 or DJM-300; when this is done, the player's CUE standby is automatically released when the DJ mixer's channel fader is raised, thus allowing instant playback start. The player's fader start operation can also be used to produce cross-fader effects. Restoring the fader position returns the player to its cue point (back cue) automatically. The following operations are performed on the DJ Mixer. For details regarding connections and operation, consult the Operating Instructions furnished with your DJ Mixer. 1 Set CROSS FADER switch to ON. 2 Set FADER START switch to ON. 12 En During relay play DJ Mixer DJM-300 or DJM-500 Cotrol cable DJ Mixer DJM-300 or DJM-500 3 When "A" is in standby mode at cue point, move the CROSS FADER slider from right to left to automatically start playback on "A". 4 When "B" is in standby mode at cue point, move the CROSS FADER slider from left to right to automatically start playback on "B". ( "A" will simultaneously be back-cued (returns to cue point)). NOTE: Fader start and relay play cannot be performed simultaneously, since different control cable connections are required. Relay Play Using Two Players Relay play can be performed by using a commercially available miniplug cord to connect the CONTROL jacks of this unit and another CDJ series CD player. ÷ Set both player's auto cue function to ON (the AUTO CUE indicators will light in the displays). ÷ Set your audio mixer's fader control to its center po- sition. 1. Begin playback on the first player. 2. When the currently playing track ends, playback will begin automatically on the standby player. 3. The first player will enter cue standby mode at the beginning of the next track on its disc. ÷ By repeating this operation, the two players can be used to perform continuous relay play. ÷ By loading new discs on the standby player, you can construct a continuous program of whatever tracks you wish. ÷ By setting a cue point on the standby player, you can perform relay to any desired cue point on the selected track (see page 10: Setting a Cue Point). NOTE: ÷ Relay play may not operate properly if the audio out jacks on the two players are not connected to the same audio mixer. ÷ If the power to one player is turned off during its playback, the other player may begin playback.