Pioneer CLD-V2800 CLD-V8000 User's Manual31178843 - Page 61

Chapter Three • CLD-V2800 Level III 47) REGISTER C SET LD/CD Function: Changes the current setting of Register C. (Miscellaneous) Format: Integer R C Explanation: When power is turned ON, the Side Repeat function of Register C is set to ON. If Function Switch 3 on the rear panel of the player is ON (DOWN), the Load Start and Power-On Start functions of Register C are also set to ON. If Function Switch 4 is ON (DOWN), background color will be set to Black. Baud Rates of 9600 and 2400 cannot be set with this command. Note that some functions, such as Test Mode, may suspend playback or disable further control. Test Mode is for use only by Authorized Service Centers, for evaluating player operations. The functions listed below can be set. To set a function to ON, give the value indicated by the integer. To set multiple functions to ON, the integer values must be added up. All eight functions can be specified in combination by using the decimal values from 0 to 255. The completion status is returned immediately. NOTE: When "Repeat Side", "Chapter Repeat" or "Track Repeat" is selected by the RCU, the "Side Repeat" function of Register C goes to "ON" and when "Auto Return" is selected by the RCU, the "Side Repeat" function of Register C goes to "OFF". Integer 1 2 4 8 16 32 64 128 Figure 3-U Function Side-Repeat Load-Start Power-on-Start (Not Used) Background Color TxD Terminator BAUD Rate Test Mode 1 0 ON ON ON - BLACK 1200 ON OFF OFF OFF - BLUE 4800 OFF Execution: * Initial value 0 3 R C R * Side-Repeat, Load-Start to ON, background color BLUE 1 6 R C R * Background Color BLACK; Side-Repeat and Load-Start to OFF 3-42 TP 120 v. 1.0 • 10/95 CLD-V2800 Level III User's Manual