Pioneer DEH-3200UB Owner's Manual - Page 16

Appendix Additional Information Troubleshooting Symptom Cause Action (See) The display automatically returns to the ordinary display. You did not perform any operation within about 30 seconds. Perform operation again. The repeat play Depending on Select the repeat range changes the repeat play play range again. unexpectedly. range, the se- lected range may change when selecting another folder or track, or when fast forwarding/reversing. A subfolder is not played back. Subfolders cannot be played when Folder (folder repeat) is selected. Select another repeat play range. NO XXXX ap- No text informapears when a tion embedded display is changed (e.g., NO TITLE). Switch the display or play another track/file. The display is illuminated when the unit is turned off. Demo mode is on. Press /DISP/ SCRL to cancel demo mode. The unit is mal- You are using a Move electrical de- functioning. device, such as a vices that may be There is inter- cell phone, that causing the inter- ference. transmits electro- ference away from magnetic waves the unit. near the unit. Error messages When you contact your dealer or your nearest Pioneer Service Center, be sure to note the error message. Built-in CD Player Message Cause Action ERROR-11, 12, Dirty disc Clean disc. 17, 30 Scratched disc Replace disc. ERROR-10, 11, Electrical or me12, 15, 17, 30, chanical A0 Turn the ignition switch OFF and back ON, or switch to a different source, then back to the CD player. ERROR-15 The inserted disc Replace disc. is blank ERROR-22, 23 Unsupported CD Replace disc. format Format read There is some- Wait until the mestimes a delay be- sage disappears tween the start of and you hear playback and sound. when you start to hear any sound NO AUDIO The inserted disc Replace disc. does not contain any playable files SKIPPED The inserted disc Replace disc. contains DRM protected WMA files PROTECT All the files on the inserted disc are embedded with DRM Replace disc. USB storage device Message NO DEVICE Format read Cause Action When plug and play is off, no USB storage device is connected. ! Turn the plug and play on. ! Connect a compatible USB storage device. There is some- Wait until the mestimes a delay be- sage disappears tween the start of and you hear playback and sound. when you start to hear any sound 16 En