Pioneer DEH-3200UB Owner's Manual - Page 9

CD/CD-R/CD-RW and USB, storage devices, Operating this unit - cd receiver

Page 9 highlights

Operating this unit Section 02 English Local (local seek tuning) Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the desired setting. FM: OFF-Level1-Level2-Level3-Level4 AM: OFF-Level1-Level2 Larger setting number is higher level. The highest level setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations. 3 Press M.C. to confirm the selection. Note Operation is complete even if the menu is cancelled before being confirmed. CD/CD-R/CD-RW and USB storage devices Basic Operations Playing a CD/CD-R/CD-RW 1 Insert the disc, label side up, into the disc loading slot. 1 If a disc has already been inserted, press SRC/ OFF to select the built-in CD player. Ejecting a CD/CD-R/CD-RW 1 Press h (eject). Playing songs on a USB storage device 1 Open the USB connector cover. 2 Plug in the USB storage device using a USB cable. Stop playing a USB storage device 1 You may disconnect the USB storage device at anytime. Selecting a folder 1 Push M.C. up or down. Selecting a track 1 Push M.C. left or right. Fast forwarding or reversing 1 Push and hold M.C. left or right. Returning to root folder 1 Press and hold BAND/ESC. Switching between compressed audio and CD-DA 1 Press BAND/ESC. Notes ! When playing compressed audio, there is no sound during fast forward or reverse. ! USB portable audio players that can be charged via USB will be recharged when plugged in and the ignition switch is set to ACC or ON. ! Disconnect USB storage device from unit when not in use. ! If plug and play is on and a USB storage device is present, depending on the type of device, the source may switch to USB automatically when you turn on the engine. Please change plug and play setting as necessary. Refer to USB PnP (plug and play) on page 15. Displaying text information Selecting the desired text information 1 Press /DISP/SCRL. CD TEXT discs: Track number and play time- disc title-disc artist name-track title-track artist name WMA/MP3/AAC: Play time-folder name-file name-track title-artist name-album title- genre-comment-bit rate-folder and track numbers WAV: Play time-folder name-file name-track title-artist name-album title-genre-comment-sampling frequency-folder and track numbers Scrolling the text information to the left 1 Press and hold /DISP/SCRL. Notes ! Incompatible text stored with the audio file may not be displayed or may be displayed incorrectly. ! Depending on the version of iTunes used to write MP3/AAC files onto a disc, comment information may be incorrectly displayed. En 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

Local
(local seek tuning)
Local seek tuning lets you tune in only those radio sta-
tions with sufficiently strong signals for good recep-
tion.
1
Press
M.C.
to display the setting mode.
2
Turn
M.C.
to select the desired setting.
FM:
OFF
Level1
Level2
Level3
Level4
AM:
OFF
Level1
Level2
Larger setting number is higher level. The highest
level setting allows reception of only the strongest
stations, while lower settings let you receive pro-
gressively weaker stations.
3
Press
M.C.
to confirm the selection.
Note
Operation is complete even if the menu is can-
celled before being confirmed.
CD/CD-R/CD-RW and USB
storage devices
Basic Operations
Playing a CD/CD-R/CD-RW
1
Insert the disc, label side up, into the disc loading
slot.
1
If a disc has already been inserted, press
SRC
/
OFF
to select the built-in CD player.
Ejecting a CD/CD-R/CD-RW
1
Press
h
(eject).
Playing songs on a USB storage device
1
Open the USB connector cover.
2
Plug in the USB storage device using a USB
cable.
Stop playing a USB storage device
1
You may disconnect the USB storage device at
anytime.
Selecting a folder
1
Push
M.C.
up or down.
Selecting a track
1
Push
M.C.
left or right.
Fast forwarding or reversing
1
Push and hold
M.C.
left or right.
Returning to root folder
1
Press and hold
BAND
/
ESC
.
Switching between compressed audio and CD-DA
1
Press
BAND
/
ESC
.
Notes
!
When playing compressed audio, there is no
sound during fast forward or reverse.
!
USB portable audio players that can be
charged via USB will be recharged when
plugged in and the ignition switch is set to
ACC or ON.
!
Disconnect USB storage device from unit
when not in use.
!
If plug and play is on and a USB storage de-
vice is present, depending on the type of de-
vice, the source may switch to
USB
automatically when you turn on the engine.
Please change plug and play setting as neces-
sary. Refer to
USB PnP
(plug and play)
on page
15.
Displaying text information
Selecting the desired text information
1
Press
/
DISP
/
SCRL
.
CD TEXT discs
: Track number and play time
disc title
disc artist name
track title
track ar-
tist name
WMA/MP3/AAC
: Play time
folder name
file
name
track title
artist name
album title
genre
comment
bit rate
folder and track
numbers
WAV
: Play time
folder name
file name
track
title
artist name
album title
genre
com-
ment
sampling frequency
folder and track
numbers
Scrolling the text information to the left
1
Press and hold
/
DISP
/
SCRL
.
Notes
!
Incompatible text stored with the audio file
may not be displayed or may be displayed in-
correctly.
!
Depending on the version of iTunes used to
write MP3/AAC files onto a disc, comment in-
formation may be incorrectly displayed.
Operating this unit
En
9
English
Section
02