Pioneer DEH-P610BT Owner's Manual - Page 37

Section Using Bluetooth wireless technology 08 English Adjusting the intended party's listening volume To maintain the good speech quality, this unit can adjust the intended party's listening volume. If the volume is not enough for intended party, adjust this function. 1 Display the function menu. Refer to Introduction to advanced operations on the previous page. 2 Use MULTI-CONTROL to select END VOLUME. 3 Push MULTI-CONTROL left or right to select the desired setting. 1-2-3-4-5 # This function can be performed even while talking on the phone. # Settings can be stored for each device. Switching the ring tone You can select whether to use this unit's ring tone or not. If this function is set to on, ring tone from this unit will sound. 1 Display the function menu. Refer to Introduction to advanced operations on the previous page. 2 Use MULTI-CONTROL to select RING TONE. 3 Press MULTI-CONTROL to turn ring tone on. To turn ring tone off, press MULTI-CONTROL again. Making a call by entering phone number Important Be sure to park your vehicle and apply the parking brake when performing this operation. 1 Display the function menu. Refer to Introduction to advanced operations on the previous page. 2 Use MULTI-CONTROL to select NUMBER DIAL. 3 Push MULTI-CONTROL up or down to select a number. 4 Push MULTI-CONTROL left or right to move the cursor to the previous or next position. # Up to 32 digits can be entered. 5 When you finish entering the number, press MULTI-CONTROL. Call confirmation appears. 6 Press MULTI-CONTROL to make a call. 7 To end the call, press PHONE/ / BT MENU. Setting the private mode During a conversation, you can switch to private mode (talking directly on your cellular phone). 1 Display the function menu. Refer to Introduction to advanced operations on the previous page. 2 Use MULTI-CONTROL to select PRIVATE. 3 Press MULTI-CONTROL to turn private mode on. To turn private mode off, press MULTI-CONTROL again. En 37