Pioneer DEH-P610BT Owner's Manual - Page 49
XM tuner, Available accessories, Storing and recalling broadcast
UPC - 012562951416
View all Pioneer DEH-P610BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Available accessories Section 12 English XM tuner Listening to XM Satellite Radio You can use this unit to control an XM satellite digital tuner (GEX-P920XM), which is sold separately. For details concerning operation, refer to the XM tuner's operation manuals. This section provides information on XM operations with this unit which differs from that described in the XM tuner's operation manual. ! With this unit, you can operate two addi- tional functions: XM channel direct selection and preset channel list. % Selecting an XM band Press BAND/ESC. # Band can be selected from XM1, XM2 or XM3. % Selecting a channel Push MULTI-CONTROL left or right. # If you push and hold MULTI-CONTROL left or right, you can increase or decrease channel number continuously. # You can also perform tuning from a desired channel category. (Refer to Selecting a channel in the channel category on the next page.) Switching the XM display % Press DISP/SCRL to switch the XM display. Selecting an XM channel directly You can select an XM channel directly by entering the desired channel number. 1 Press DIRECT on the remote control. Channel number input display appears. 2 Use 0 to 9 on the remote control to input the desired channel number. # To cancel the input numbers, press CLEAR on the remote control. 3 Press DIRECT on the remote control. The XM channel of entered number is selected. Note After entering the number input mode, if you do not perform an operation within about eight seconds, the mode is automatically canceled. Storing and recalling broadcast stations You can easily store up to six broadcast stations for later recall. ! Six stations for each band can be stored in memory. 1 Press /LIST. Preset screen is displayed. 2 Use MULTI-CONTROL to store the selected station in memory. Turn to change the preset number. Press and hold to store. The XM preset number you have selected will flash and then remain lit. The selected station has been stored in memory. 3 Use MULTI-CONTROL to select the desired station. Turn to change the station; press to select. # You can also change the station by pushing MULTI-CONTROL up or down. # If you do not operate the list within about 30 seconds, the display is automatically returned to the ordinary display. Selecting the XM channel select mode You have two methods for selecting a channel: by number and by category. When selecting by number, channels in any category can be selected. Select by category to narrow your search down to only channels in a particular category. En 49