Pioneer DVL-909 Service Guide - Page 14

DV-505, DVL-909, DV-S9 (11) Tracking Close 1. Press [STEP RVS] (50) key of the remote control unit in the play condition. 2. Switch the open/close by pressing [PLAY] key of the remote control unit or the player during the play (CD only). (12) Slider In 1. Press [SCAN RVS] (11) key of the remote control unit in the tracking off condition. 2. Turn the shuttle of the remote control unit in the REV direction (2C to 2F) in the tracking off condition. (DVD only) (13) Slider Out 1. Press [SCAN FWD] (10) key of the remote control unit in the tracking off condition. 2. Turn the shuttle of the remote control unit in the FWD direction (28 to 2A) in the tracking off condition. (DVD only) (14) Scan In 1. Press [SCAN RVS] (11) key of the remote control unit in the tracking on condition. 2. Turn the shuttle of the remote control unit in the REV direction (2C to 2F) in the tracking on condition. • DVD can be scanned only in the case of the play 2 (playback without demultiplex). (15) Scan Out 1. Press [SCAN FWD] (10) key of the remote control unit in the tracking on condition. 2. Turn the shuttle of the remote control unit in the FWD direction (28 to 2A) in the tracking on condition. • DVD can be scanned only in the case of the play 2 (playback without demultiplex). (16) Loading In/Out When pressing [SKIP REV] (53) key of the remote control unit in the open condition, it loads in the clamp direction. Then it loads in the open direction when pressing [SKIP FWD] (52) key. • This function can practice only when it is indicated with "OPEN" in FL. (17) Tilt Neutral Press [SPEED DOWN] (46) key of the remote control unit. (18) Tilt Servo On/Off a. On Press [SPEED UP] (47) key of the remote control unit. b. Off Press [SKIP REV] (53) key and [SKIP FWD] (52) key of the remote control unit at the tilt servo on or the tilt neutral. (19) Tilt Down A manual moves in the going down direction when [SKIP REV] (53) key of the remote control unit is pressed during the play at the time of tilt off. (20) Tilt Up A manual moves in the going up direction when [SKIP FWD] (52) key of the remote control unit is pressed during the play at the time of tilt off. (21) Focus Jump + Focus jumps in 1 layer from 0 layer when [MULTI FWD] (58) key of the remote control unit is pressed. (DVD only) (22) Focus Jump - Focus jumps in 0 layer from 1 layer when [MULTI REV] (55) key of the remote control unit is pressed. (DVD only) (23) The First And The Second Screen Switching Every time [DISPLAY] (43) key of the remote control unit is pressed, the contents of the version indication part (the bottom right of the screen) change. (Refer to page 17.) (24) Screen Display On 1. Press [DISPLAY] (43) key of the remote control unit. 2. Display on/off switches every time [PROGRAM] (4C) key of the remote control unit is pressed. • When [DISPLAY] key is pressed in the display on, change the part number indication of the microprocessor and revision indication. • Initial state is screen display on and it becomes the part number indication of the microprocessor. (25) Screen Display Off 1. Press [AUDIO] (1E) key of the remote control unit. 2. Display on/off switches every time [PROGRAM] (4C) key of the remote control unit is pressed. (26) Background Color Switching 1. Change the background color (eight colors) prepared for in advance every time [2/R] (49) key of the remote control unit is pressed in order. [Blue→Green→Light blue→Red→Purple→Yellow→ Gray→Black→Blue ....] 2. Change the background color (eight colors) prepared for in advance every time [1/L] (4B) key of the remote control unit is pressed in order. [Blue→Black→Gray→Yellow→Purple→Red→ Light blue→Green→Blue ....] (27) Video Output Switching 1. It becomes component output when pressing [DIGITAL EFFECT] (5C) key of the remote control unit. 2. It becomes composite output when pressing [STILL WITH SOUND] (5B) key of the remote control unit. 14