Pioneer FH-P4100 Owner's Manual - Page 40
Using the position selector, Digital Signal Processor, Adjusting BBE sound level - car stereo
View all Pioneer FH-P4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Section 09 Digital Signal Processor 1 Press DSP to select the sound field control. Press DSP until SFC appears in the display. # If the sound field control has been previously set to a sound field program then the title of that previously selected sound field program will be displayed, such as STUDIO, JAZZ, CLUB, OCT1, OCT2, or BBE. 2 Select a sound field program by pressing 16. Select the desired sound field program by pressing one of the numbered buttons, from 16, which correspond to the different sound field programs as listed above. # You can also sequentially select a sound field program by pressing c or d. Adjusting BBE sound level With BBE sound processing technology, you can adjust the level of BBE. 1 Recall BBE. See Recalling sound field programs on the previous page. 2 Press a or b to adjust the level of BBE. Each press of a or b increases or decreases the level of BBE. +4 4 is displayed as the level is increased or decreased. Using the position selector One way to assure a more natural sound is to clearly position the stereo image, putting you right in the center of the sound field. The position selector adjusts the volume level of sound from each speaker to match seat positions and the number of people in the car and lets you recall settings at the touch of a button. Here is a list of the positions: Button Display Indicator Position a FRONT Front seat b ALL All seats c FRONT-L Front seat left d FRONT-R Front seat right 1 Press DSP to select the position selector. Press DSP until POSI appears in the display. # If the position selector has been previously set to a listening position then the title of that previously selected listening position will be displayed, such as FRONT, ALL, FRONT-L or FRONT-R. 2 Press c/d/a/b to select a listening position. Press one of these, c/d/a/b, to select a listening position as listed in the table. # To cancel the selected listening position, press the same button again. # When the rear output setting is subwoofer, you cannot select ALL. Refer to Switching the rear output setting on page 43. 40 En