Pioneer FH-P4100 Owner's Manual - Page 43
Switching the warning, Switching the auxiliary, setting, Switching the dimmer
View all Pioneer FH-P4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Initial Settings Section 10 English 2 Select the portion of the time display you wish to set with c/d. Pressing c/d will select a portion of the clock display: HourMinute As you select portions of the clock display the portion selected will blink. 1 Press FUNCTION to select AUX. Press FUNCTION repeatedly until AUX appears in the display. 2 Select AUX on or off with a/b. Pressing a/b will switch AUX between on and off and that status will be displayed (e.g., AUX :ON). 3 Select the correct time with a/b. Pressing a will increase the selected hour or minute. Pressing b will decrease the selected hour or minute. Switching the warning tone If the front panel is not detached from the head unit within five seconds of turning off the ignition, a warning tone will sound. You can turn off this warning tone. 1 Press FUNCTION to select WARN. Press FUNCTION repeatedly until WARN appears in the display. 2 Select WARN on or off with a/b. Pressing a/b will switch WARN between on and off and that status will be displayed (e.g., WARN :ON). Switching the auxiliary setting It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. Switching the dimmer setting To prevent the display from being too bright at night, the display is automatically dimmed when the cars headlights are turned on. You can switch dimmer on or off. 1 Press FUNCTION to select DIMMER. Press FUNCTION repeatedly until DIMMER appears in the display. 2 Select DIMMER on or off with a/b. Pressing a/b will switch DIMMER between on and off and that status will be displayed (e.g., DIMMER :ON). Switching the rear output setting This units rear output (rear speaker leads output and RCA rear output) can be used for fullrange speaker or subwoofer connection. If you switch the rear output setting to the subwoofer, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp. ! If you connect a subwoofer to the rear out- put, set the output setting to subwoofer. En 43