Pioneer FHD1 Owner's Manual - Page 10
PIONEER stand or installation bracket sold - manual
UPC - 012562818733
View all Pioneer FHD1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
02 Safety Precautions Installation using the optional PIONEER stand or installation bracket • Please be sure to request installation or mounting of this unit or the installation bracket by an installation specialist or the dealer where purchased. • When installing, be sure to use the bolts provided with the stand or installation bracket. • For details concerning installation, please refer to the instruction manual provided with the stand or installation bracket. IInstallation using accessories other than the PIONEER stand or installation bracket (sold separately) • When possible, please install using parts and accessories manufactured by PIONEER. PIONEER will not be held responsible for accident or damage caused by the use of parts and accessories manufactured by other companies. • For custom installation, please consult the dealer where the unit was purchased, or a qualified installer. CAUTION To avoid malfunction, overheating of this unit, and possible fire hazard, make sure that the vents on the main unit are not blocked when installing. Also, as hot air is expelled from the air vents, be careful of deterioration and dirt build up on rear surface wall, etc. CAUTION Please be sure to use an M8 (Pitch = 1.25 mm) (1/16 in.) bolt. (Only this size bolt can be used.) CAUTION This unit incorporates a thin design. To ensure safety if vibrated or shaken, please be sure to take measures to prevent the unit from tipping over. Wall-mount installation of the unit This unit has been designed with bolt holes for wall-mount installation, etc. The installation holes provided are shown in the accompanying illustration. • Be sure to attach in 4 or more locations above and below, left and right of the center line. • Use bolts that are long enough to be inserted 12 mm to 18 mm (1/2 in. to 11/16 in.) into the main unit from the attaching surface. Refer to the side view diagram in the accompanying illustration. • As this unit is constructed with glass, be sure to install it on a flat, unwarped surface. 10 En