Pioneer FHD1 Owner's Manual - Page 19
How to route cables
UPC - 012562818733
View all Pioneer FHD1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Preparation 06 English How to route cables Speed clamps and bead bands are included with this unit for bunching cables together. Once components are connected, follow the following steps to route cables. * As viewed from the rear of the display. 1. Organize cables together using the provided speed clamps. Insert ➀ into an appropriate hole on the rear of the unit, then snap ➁ into the back of ➀ to fix the clamp. Speed clamps are designed to be difficult to undo once in place. Please attach carefully. 2. Bunch separated cables together and secure them with the provided bead bands. Do not allow excessive stress to be placed on the ends of cables. NOTE • Cables can be routed to the right or left. To attach the speed clamps to the main unit Connect the speed clamps using the 6 holes marked with "o" below, depending on the situation. * As viewed from the rear of the display. To remove speed clamps Using pliers, twist the clamp 90° and pull it outward. In some cases the clamp may have deteriorated over time and may get damaged when removed. 19 En