Pioneer FHD1 Owner's Manual - Page 30
Useful Adjustment Settings
UPC - 012562818733
View all Pioneer FHD1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
10 Useful Adjustment Settings Useful Adjustment Settings Switching the vertical drive frequency (AV mode only) You can switch the vertical drive frequency for screen display between 75 Hz and 100 Hz. Choose the drive frequency that better suits your input signals. 1 Press HOME MENU. 2 Select "Option" ( / then ENTER (ENTER/DISP.)). 3 Select "Drive Mode" ( / ). 4 Select "75Hz" or "100Hz" ( / ). Option Position Auto Size 4:3 Mode Drive Mode Off 75Hz 5 Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit the menu. NOTE • This setting can be made for each input source separately. • This setting is disabled when 480i, 480p, 1080i@60 Hz, 720p@60 Hz, 1080p@24 Hz, 1080p@60 Hz, 4.43 NTSC signals, or NTSC signals are input. Adjusting image positions (AV mode only) Adjust the horizontal and vertical positions of images on the Plasma Display. 1 Press HOME MENU. 2 Select "Option" ( / then ENTER (ENTER/DISP.)). 3 Select "Position" ( / then ENTER (ENTER/DISP.)). 4 Select "H/V Position Adjust" ( / then ENTER (ENTER/ DISP.)). Position H/V Position Adjust Reset 5 Adjust the vertical position ( / ) or the horizontal position ( / ). 6 Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit the menu. NOTE • To restore the factory defaults for all items, press / to select "Reset" in step 4, and then press ENTER (ENTER/ DISP.). A confirmation screen appears. Press / to select "Yes", and then press ENTER (ENTER/DISP.). • Adjustments are stored separately according to input source. Adjusting image positions and clock automatically (PC mode only) Use Auto Setup to automatically adjust the positions and clock of images coming from a personal computer. 1 Press PC AUTO SET UP on the remote control unit. • Auto Setup starts. 2 Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit the menu. NOTE • When Auto Setup is finished, "Auto Setup completed." appears. • Even when "Auto Setup completed" appears, Auto Setup may have failed, depending on conditions. • Auto Setup may fail with a PC image composed of similar patterns or monochrome. If not successful, change the PC image and try again. • Be sure to connect the computer to the unit and switch it on before starting Auto Setup. Adjusting image positions and clock manually (PC mode only) Usually you can easily adjust the positions and clock of images using Auto Setup. Use Manual Setup to optimise the positions and clock of images when necessary. 1 Press HOME MENU. 2 Select "Option" ( / then ENTER (ENTER/DISP.)). 3 Select "Manual Setup" ( / then ENTER (ENTER/DISP.)). 4 Select the item to be adjusted ( / then ENTER (ENTER/ DISP.)). Manual Setup H/V Position Adjust Clock 0 Phase 0 Reset 5 Perform adjustment ( / and / ). With "Clock" or "Phase" selected, you can change the parameter using / . 6 Press HOME MENU, INPUT 1 to INPUT 6 (INPUT) to exit the menu. NOTE • To restore the factory defaults for all the items, press / to select "Reset" in step 4, and then press ENTER (ENTER/DISP.). A confirmation screen appears. Press / to select "Yes", and then press ENTER (ENTER/DISP.). 30 En