Pioneer HTS-GS1 Owner's Manual - Page 31

Additional information 09 English Use in an excessively dusty or damp environment. Place directly on top of an amplifier, or other component in your stereo system that becomes hot in use. Use near a television or monitor as you may experience interference-especially if the television uses an indoor antenna. Use in a kitchen or other room where the system may be exposed to smoke or steam. Use on a thick rug or carpet, or cover with cloth-this may prevent proper cooling of the system unit. Place on an unstable surface, or one that is not large enough to support all four of the system unit's feet. Setting up the remote to control your TV You can use the supplied remote to control your TV. To be able to use this feature you first have to program the remote with a maker code from the table on the following page. ENTER BACK CHANNEL - PREV NEXT VOLUME Glossary Dolby Digital Dolby Pro Logic II DTS A multi-channel audio encoding system developed by Dolby Laboratories that enables far more audio to be stored on a disc than PCM encoding. A matrix decoding technology developed by Dolby Laboratories that expands any two-channel source audio, such as CDs and TV broadcasts, to a five-channel playback (left/center/right/left surround/right surround), resulting in a surround experience. A multi-channel audio encoding system developed by Digital Theater Systems that enables far more audio to be stored on a disc than PCM encoding. Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. The Windows logo, Windows Media, Xbox 360 and the Xbox logos are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries and are used under license from Microsoft. AUDIO ANGLE PLAY MODE / / TIMER REC REC MODE + + SETUP /TUNE SR ONETOUCHCOPY /ST- ENTER /ST+ MENU - SOUND /TUNE TEST TONE SLEEP SURROUND ADVANCED 0 TV/DVD TV CONTROL ++ JUKE BOX INPUT CHANNEL VOLUME DISPLAY -- RDS DISP 1 Switch on your TV. 2 Press and hold down the BACK button, then enter the maker code for your TV. The following table shows which buttons on the remote correspond to which numbers. Number Remote button 1 SETUP 2 /TUNE+ 3 SR+ 4 /ST- 5 ENTER Number Remote button 6 /ST+ 7 SOUND 8 /TUNE- 9 TEST TONE 0 SLEEP See the table on the next page for the list of maker codes. If there is more than one code given for your maker, input the first one in the list. • If the maker's name of your TV doesn't appear in the table, you will not be able to use this remote to control your TV. 3 Point the remote towards your TV and press TV to check that the remote works with your TV. If the remote is set up correctly, the TV should switch off. If it doesn't and there is another code given for your maker, repeat step 2 with a new code. 31 En