Pioneer P470MP Owner's Manual - Page 36
Adjusting loudness, Using subwoofer output, Audio Adjustments, Selecting bass frequency
UPC - 037459108773
View all Pioneer P470MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Section 08 Audio Adjustments 3 Press a or b to adjust the level. Each press of a or b increases or decreases the selected bass or treble level. +6 6 is displayed as the level is increased or decreased. Selecting bass frequency You can select the bass frequency for level adjustment. 1 Press AUDIO and hold until frequency and the Q factor (e.g., F- 80:Q1W) appears in the display. 2 Press AUDIO to select B. Press AUDIO until B appears in the display. 3 Press c or d to select the desired frequency. Press c or d until the desired frequency appears in the display. 4063100160 (Hz) Selecting treble frequency You can select the treble frequency for level adjustment. 1 Press AUDIO and hold until frequency and the Q factor (e.g., F- 80:Q1W) appears in the display. 2 Press AUDIO to select T. Press AUDIO until T appears in the display. 3 Press c or d to select the desired frequency. Press c or d until the desired frequency appears in the display. 2k4k6k10k (Hz) Adjusting loudness Loudness compensates for deficiencies in the low- and high-sound ranges at low volume. 1 Press AUDIO to select LOUD. Press AUDIO until LOUD appears in the display. 2 Press a to turn loudness on. Loudness level (e.g., LOUD :MID) appears in the display. 3 Press c or d to select a desired level. Each press of c or d selects level in the following order: LOW (low)MID (mid)HI (high) 4 Press b to turn loudness off. LOUD :OFF appears in the display. Using subwoofer output Turning a subwoofer on/off This unit is equipped with a subwoofer output which can be turned on or off. 1 Press AUDIO to select SUB, W. Press AUDIO until SUB, W appears in the display. # You can also select the subwoofer setting menu by pressing SW on the unit. # When the subwoofer controller setting is P/O:FUL, you cannot select SUB, W. 2 Press a to turn subwoofer output on. Sub W.:NOR appears in the display. Subwoofer output is now on. # If the subwoofer output phase has been set to the reverse, Sub W.:REV will be displayed. # To turn subwoofer output off, press b. 36 En