Pioneer P470MP Owner's Manual - Page 38
Adjusting source levels, Audio Adjustments, Press AUDIO to select SLA.
UPC - 037459108773
View all Pioneer P470MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Section 08 Audio Adjustments 2 Press a to turn high pass filter on. HPF: 80 appears in the display. High pass filter is now on. # If the high pass filter has been previously adjusted, the frequency of that previously selected will be displayed instead of HPF: 80. # To turn high pass filter off, press b. 3 Press c or d to select cut-off frequency. Each press of c or d selects cut-off frequencies in the following order: 5080125 (Hz) Only frequencies higher than those in the selected range are outputted from the front or rear speakers. Notes ! Since the FM tuner volume is the control, it is not possible to apply source level adjustments to the FM tuner. ! The AM tuner volume level can also be adjusted with source level adjustments. ! The built-in CD player and the multi-CD player are set to the same source level adjustment volume automatically. ! External unit 1 and external unit 2 are set to the same source level adjustment volume automatically. Adjusting source levels SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. ! Settings are based on the FM tuner volume level, which remains unchanged. 1 Compare the FM tuner volume level with the level of the source you wish to adjust. 2 Press AUDIO to select SLA. Press AUDIO until SLA appears in the display. 3 Press a or b to adjust the source volume. Each press of a or b increases or decreases the source volume. SLA : +4 SLA : 4 is displayed as the source volume is increased or decreased. 38 En