Pioneer P470MP Owner's Manual - Page 40
Setting the rear output and, subwoofer controller, Initial Settings, Press FUNCTION to select R-SP.
UPC - 037459108773
View all Pioneer P470MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Section 09 Initial Settings 1 Press FUNCTION to select AUX. Press FUNCTION repeatedly until AUX appears in the display. 2 Press a or b to turn AUX on or off. Pressing a or b will turn AUX on or off and that status will be displayed (e.g., AUX :ON). Setting the rear output and subwoofer controller This units rear output (rear speaker leads output) can be used for full-range speaker (R-SP : FUL) or subwoofer (R-SP : S/W) connection. If you switch the rear output setting to the R-SP : S/W, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp. Initially, the unit is set for rear full-range speaker connection (R-SP : FUL). When rear output is connected to full range speakers (when R-SP : FUL is selected), you can connect the RCA subwoofer output to a subwoofer. In this case, you can select whether to use the subwoofer controllers (low pass filter, phase) built-in P/O:S/W or the auxiliary P/O:FUL. 1 Press FUNCTION to select R-SP. Press FUNCTION repeatedly until R-SP appears in the display. 2 Press a or b to switch the rear output setting. Pressing a or b will switch between R-SP : FUL (full-range speaker) and R-SP : S/W (subwoofer) and that status will be displayed. # When no subwoofer is connected to the rear output, select R-SP : FUL. # When a subwoofer is connected to the rear output, set for subwoofer R-SP : S/W. # When the rear output setting is R-SP : S/W, you cannot change the subwoofer controller. 3 Press c or d to switch the subwoofer output or non fading output. Pressing c or d will switch between P/O:S/W and P/O:FUL and that status will be displayed. Notes ! Even if you change this setting, there is no output unless you turn the nonfading output (refer to Using nonfading output on page 37) or subwoofer output (refer to Using subwoofer output on page 36) in the audio menu on. ! If you change the subwoofer controller, subwoofer output and nonfading output in the audio menu return to the factory settings. 40 En