Pioneer PDR-W37 Owner's Manual - Page 22

5 Recording Features TIME ABC DEF 1 2 3 GHI 4 PQRS 7 JKL 5 TUV 8 MNO 6 WXYZ 9 MARK 10/0 >10 4 ¢ REC THIS 7 DISC 1 DISC 2 DISC 3 PROGRAM OPEN/CLOSE 10 20 30 COMPACT DISC RECORDER / MULTI-CD CHANGER ◊ÛB¿ˆ≤≥ 3 - COMPACT DISC MULTI CHANGER 7 CD=CD-R START REC THIS REC MODE COMPACT DISC DIGITAL RECORDER AUTO SPACE OPEN/CLOSE 0 7 CD TEXT Hi-bitLegatoLinkConversion Recording a programmed selection You can automate the process of making a mix CD by using the programming function of the disc changer. 1 Load the CD(s) you want to program tracks from in to the CD changer. You can use any of the three disc trays in the changer. 2 Load a CD-R or CD-RW into the CD-R tray. If the disc isn't blank, make sure that there is enough space on the disc for what you want to record (see Switching the Display on pages 16-18 to check this). 3 Program a playlist of tracks you want to record. For detailed instructions on programming a playlist see Programming a playlist (3-CD changer) on page 35. 5 If you want to automatically space the tracks on the recording, press AUTO SPACE. Switching on automatic spacing makes sure that there's four seconds of silence between each recorded track. 6 Press CD= CD-R START (REC THIS). Recording stops automatically after the playlist has finished. • If the button is blinking, there's not enough space on the disc for what you want to record. Press again to start recording anyway, or press 7 to cancel. If the playlist is longer than the recording time available on the CD-R/CD-RW, recording stops when the end of the disc is reached. • If you want to now finalize the disc, turn to page 30. 4 Press REC MODE. The display shows PROGRAM REC. If you want to switch the copying speed, do so here. The default is 2x speed. See Changing the recording speed on page 28 to change it. If you want to adjust the digital recording level, do so here. The default is 0dB. See Setting the recording level on page 28 to adjust it. 22