Pioneer PDR-W37 Owner's Manual - Page 25

TIME NAME CLIP NAME 4 CURSOR ¢ 1 ENTER ¡ COMPACT DISC RECORDER / MULTI-CD CHANGER ◊ÛB¿ˆ≤≥ 3 - COMPACT DISC MULTI CHANGER 5 Recording Features COMPACT DISC DIGITAL RECORDER NAME 4 1 ¡ ¢ ¶ REC VOL PUSH ENTER CD TEXT Hi-bitLegatoLinkConversion Copying track names to other tracks If you need to name several tracks with similar names-several parts of one suite, for example-you can name the first one using the procedure detailed above, then simply copy that name to the other tracks and edit them as required. This can save you a lot of time over naming each track individually. The recorder stores the last three names you've copied using the name clip function in its memory (up to 40 characters each). When you copy another track name, the oldest one is deleted from memory. 7 Use the jog dial to select one of the previous three names stored, then press the jog dial (ENTER). On the remote, use the 4 and ¢ buttons to select a name, then press ENTER. The display flashes Name Insert briefly and the selected name is inserted at the point you chose. • Edit the name further if necessary. 1 Go to the track with the name you want to copy. 8 Press NAME to leave the track name mode. Use one of the usual methods-track skip, direct selection, etc. 2 Press NAME CLIP to copy the currently displayed into memory. The display should confirm that the track name has been copied. If the message (c) Copyright appears in the display, the name is copyright protected (as in the case of playback only discs) and it can't be copied. 3 Go to the track that you want to copy the name to. 4 Press NAME to start editing the current track name. 5 Move the cursor to the position you want to insert the copied name. Use the 1 and ¡ buttons to move the cursor around the character display. 6 Press NAME CLIP again. The most recently clipped name appears. 25